Silicone polisher, gray (polishing nails to a shine).

This cutter is used for hardware manicure and pedicure, namely for polishing natural and artificial nails to a shine. Has a soft texture for final polishing.
The silicone polisher can be washed and disinfected.

When working with silicone polishers, you should pay attention to:

For a high-quality and quick effect, namely polishing artificial or natural nails, first use a harder nozzle, and only then the finishing one to polish to a shine. In the case of significant unevenness, roughness, gradually use the hardest nozzle first, then the medium one, and only then - for polishing to a shine - the finishing one.
Do not keep the polisher in one place, but constantly drive it in a circle, do not use it at high speeds - otherwise it will heat up the nail too much.

Abrasive silicone cutters differ in the color of the working part:

• brown - hard
• green, gray - medium hardness
• yellow - soft

Importantly! Do not subject silicone nozzles to heat treatment, otherwise the material will lose its shape and become unsuitable for further work.

It is more reliable to store nozzles in a special stand that closes. It is necessary to disinfect, clean and sterilize the cutters after each use and each client.

Immediately after work, place the nozzle in a disinfectant solution, before that it cannot be washed under water. After disinfecting, only then it is necessary to rinse the cutter under running cold water.

Next, clean the silicone nozzle.

After that, we proceed to sterilization. In this case, chemical treatment ( concentrates ) is used, otherwise, during heat treatment, the material will lose its shape and become unsuitable for further work.