TOUCH AURORA POWDER is a collection of 10 ultra-fine pearl rubbers that are extremely easy and dense to rub in.
Due to the fact that the rubbing powder consists of ultra-fine particles of premium quality, it is applied without gaps and irregularities, which makes the manicure process much easier.
Aurora Powder will complement any coating with its shimmering glow. The most delicate shimmers on light shades that resemble pearls or bright highlights on dark colors. Also adds a wet effect to the coating.

One rub on different colors will make you shine with different colors.

Advantages:
- for nail design
- fine grinding
- pearly effect on light shades
- bright shimmer on dark shades
- uniformity of rubbing
- does not lose shine
- does not fade
- economical use, due to the density of the pigment of the rubbing
- pearly glow regardless of the lighting

FEATURES :
A pearl rubbing powder that will add radiance to any monochromatic coating, as well as become a highlight in designs.
It rubs in evenly and retains its shine throughout the entire wearing period.
All 10 shades of the rubbing pads shimmer from one to five different colors.

METHOD OF APPLICATION:
- Standard preparation of the nail plate, namely:
- Surface dusting with a 240 grit file or buffer
- Degreasing the nail plate
- Application of a dehydrator
- Apply the primer/ultrabond (acid-free primer) with a semi-dry brush without touching the skin.
It is best to apply to the end of the nail without layering.
- Apply a thin or rubbing layer of transparent elastic base.
- Dry it.
- Perform standard leveling with the Rubber base, or strengthen the nails. The maximum thickness in the apex area should not exceed 1 mm.
- File the end to form the thickness and frame of the mold.
- Cover with the desired color, or leave a camouflage coating.
- Apply a thin layer of non-sticky top coat.
- Dry for 30 seconds.
- Apply the rubbing agent to the still hot top with a light rubbing motion, with an applicator, or with your finger.
- You can also apply the rubbing agent to TOUCH camouflage tops.
- Use a soft brush to remove excess rubbing agent to avoid damaging the coating.
- File the free edge with a soft nail file or buffer;
- Apply ultra-bond to the free edge;
- Fix the free edge or half of the nail plate with AIRY BASE, then dry;
- Secure with a lightly leveled top and dry in the lamp for 120 seconds.
It is recommended to apply the rubbing on a previously strengthened nail plate to prevent chipping in the free edge area.
The rubbing paste will look great on both nude or light and dark coatings.
Each color will reveal a new shimmer and bright colors of the northern lights.